Home  |  Favorites  |  Set Home

Products

BymotorsHome > Bymotors

The MP inclined speed reduction gears with parallel shafts

Generalization of the MP inclined speed reduction gears with parallel shafts:
The MP series are very small and especially adequate for narrow installation room. The installation modes are tail mode, flange mode and hollow-shafting mode.
The characteristics of the MP inclined speed reduction gears with parallel shafts:
◆ Parallel output, compact conformation, great transmission torque, stable work, low noise and long life
◆ Installation mode: base mode, flange mode and torque-link mode
◆ Reduction ratio: 4.3-25.3 of the basic model with two stages, 28.2-273 with three stages and combined to 18509
◆ The input and output rotation directions of the basic model are the same for two-stage, and opposite for three-stage and consult when combining
◆ Output mode: hollow-shafting mode or solid-shafting mode
◆ Average efficiency: 96% of two-stage, 94% of three-stage and 85% of F/CR average

 

The range of speed ratio: 4.3-273
The range of torque: 0.11-18kN
The range of power: 0.12-200kW

 

Online Service
有事点这里
有事点这里